Coated paper

Printer setup

Select [Paper Input] [Paper Type: (tray name)] [Coated Paper].

Printer driver setup

Select [Coated paper] in [Paper type].

Supported paper feeding tray

Any input tray can be used.

Make sure paper is not stacked higher than the upper limit mark () inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it.

Duplex printing

Not supported

Coated paper setup

Default: [Coated Paper 1]

If the print quality needs to be improved, select [Maintenance] [General Settings] [Coated Paper Setting] [Coated Paper 1] to [Coated Paper 7].

When selecting the paper setting depending on the thickness, select [Coated Paper 1] to [Coated Paper 5]. High numbered settings allow thicker paper to be used, but are printed more slowly.

When selecting the paper setting depending on the type, select [Coated Paper 6], [Coated Paper 7]. High numbered settings allow thicker paper to be used, but are printed more slowly.

Additional cautions

• Print speed is slightly slower than when using plain paper.

• Fan the paper before loading it. When using the bypass tray, set the paper one page at a time if multiple sheets are fed, paper jams occur, or you hear a strange noise.