Letterhead

Printer setup

Select [Paper Input] [Paper Type: (tray name)] [Letterhead].

Printer driver setup

Select [Letterhead] in [Paper type].

Supported paper feeding tray

Any input tray can be used.

Paper capacity

Make sure paper is not stacked higher than the upper limit mark () inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it.

Duplex printing

Supported

Letterhead setup

Default: [Letterhead 1]

If the print quality needs to be improved, select [Maintenance] [General Settings] [Letterhead] [Letterhead 1] to [Letterhead 3] to change the setting value to a different number depending on the paper thickness that you are using. High numbered settings allow thicker paper to be used, but are printed more slowly.

Additional cautions

When loading paper whose orientations are specified such as letterhead or letter paper, misprints may occur. Refer to "Printing on paper whose orientations are specified" for loading paper.