![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This can be specified by the administrator.
Using Web Image Monitor, select the certificate to be used for IPsec. You must install the certificate before it can be used.
Open a Web browser.
Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is "192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
Click [Login].
The administrator can log on.
Enter the login user name and login password.
Click [Configuration], and then click [Device Certificate] under "Security".
The "Device Certificate" settings page appears.
Select the certificate to be used for IPsec from the drop down box in "IPsec" under "Certificate".
Click [OK].
The certificate for IPsec is specified.
Click [OK].
Click [Logout].