Skip header
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Connecting the Printer Cables > Ethernet Cable Connection > Reading the LED Lamps

Reading the LED Lamps

For the standard Ethernet port

Standard ethernet port illustration

  1. Yellow: comes on when 100BASE-TX is being used. It comes off when 10BASE-T is being used.

  2. Green: comes on when the printer is properly connected to the network.

For the Gigabit Ethernet board

Gigabit ethernet board illustration

  1. Yellow: comes on 100BASE-TX is being used.

  2. Green: comes on when 10BASE-T is being used.

  3. Green and yellow lamps come on when 1000BASE-T is being used.

TopPreviousNext
Copyright (C) 2008