Exterior: Front View

Paper Size Dial

Adjust this dial according to the size and feed direction of the paper loaded in the paper tray.

Bypass Tray Extension

Pull this out when loading a sheet that is longer than B5 on the Bypass Tray.

Bypass Tray

Use this tray to feed in thick paper, OHP transparencies, adhesive labels, envelopes, and sheets of non-standard length. When printing on custom paper size, printer driver settings are required.

Up to 100 sheets of plain paper (80 g/m², 20 lb.) can be loaded on the Bypass Tray.

See Supported Paper for Each Tray and Loading Paper.

Control Panel

Features keys for printer operations and a display that shows the printer's operational status.

Tray Extension

Pull this out if the paper you are loading is longer than B5.

Output Tray (Standard Tray)

Prints are delivered here printed side facing down.

Paper Exit Cover

Open this cover to remove jammed paper.

Ventilator

Prevents the printer's internal components overheating.

Do not block or obstruct the ventilator area. Doing so can result in malfunctions caused by build up of heat inside the machine.

Front Cover Release Button

Press this to open the front cover.

Power Switch

Press this to turn the printer's power on and off.

Paper Tray (Tray 1)

Loads up to 500 sheets of plain paper (80 g/m², 20 lb.) into this tray for printing.

The paper tray is identified as "Tray 1" on the display.

Friction Pad

This ensures only one sheet of paper is fed in at a time. If multi-sheet feeds occur, clean the friction pad carefully. If the message "Replace Maintenance Kit", replace the friction pad with a new one.