Skip header
ManualsContentsPreviousNextHelp

Specifying encryption key manual settings

This can be specified using Web Image Monitor.

  1. Open a Web browser.

  2. Enter "http://(the machine's IP address or host name)/" in the address bar.

    When entering an IPv4 address, do not begin segments with zeros. For example: If the address is "192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.

    The top page of Web Image Monitor appears.

  3. Click [Login].

    The administrator can log on.

    Enter the login user name and login password.

  4. Click [Configuration], and then click [IPsec] under "Security".

    The IPsec settings page appears.

  5. Select [Active] for "Encryption Key Manual Settings".

  6. Click [Edit] under "Encryption Key Manual Settings".

  7. Set items for encryption key manual settings in [Settings 1].

    If you want to make multiple settings, select the settings number and add settings.

  8. Click [OK].

  9. Select [Active] for "IPsec:" in "IPsec".

  10. Set "Exclude HTTPS Communication" to [Active] if you do not want to use IPsec for HTTPS communication.

  11. Click [OK].

  12. Click [Logout].