ManualsContentsPreviousNext |
The printer status can be checked using the following commands:
UNIX: Use the "lpq" command and "rsh", "rcp", "ftp" and "sftp" parameters.
mshell: Use the "status" command.
Messages |
Description |
---|---|
Adjusting... |
The printer is initializing or calibrating. |
Call Service Center |
There is a malfunction in the printer. |
Canceling Job... |
The job is being reset. |
Configuring... |
Setting is being changed. |
Cooling Down Fusing Unit... |
Fusing unit is cooling down. |
Cover Open: Duplex Unit |
The cover of the duplex unit is open. |
Cover Open: Exit/Rear Cover |
The exit/rear cover is open. |
Current Job Suspended |
Current jobs are suspended. |
Empty: Black Toner |
The black toner cartridge is almost empty. |
Energy Saver Mode |
The printer is in Energy Saver Mode. |
Error: DIMM Value |
A memory error occurred. |
Error: Ethernet Board |
An Ethernet board error has occurred. |
Error: HDD Board |
A hard disk drive board error has occurred. |
Error: Optional Font |
An error has occurred in the font file of the printer. |
Error: Optional RAM |
An error has occurred in the SDRAM module. |
Error: Parallel I/F Board |
An error has occurred in the parallel interface. |
Error: PDL |
An error has occurred in the page description language. |
Error: Rem. Certificate Renewal |
An error has occurred in the remote certificate renewal. |
Error: USB Board |
An error has occurred in the USB board. |
Error: USB Interface |
An error has occurred in the USB interface. |
Error: Wireless Board |
An error has occurred in the wireless LAN board. |
Full: Log Data Capacity |
Log data capacity is full. |
Full: Waste Toner Bottle |
Waste toner is full. |
Hex Dump Mode |
It is a hex dump mode. |
Independent-supplier Toner |
Toner that is not recommended is set. |
In Use: Input Tray |
The input tray is being used by other functions. |
Jobs Suspended |
All jobs are suspended. |
Loading Toner... |
Toner is being supplied. |
Log Data Transfer failed |
Log transfer has failed. |
Low: Black Toner |
The black toner cartridge is not set correctly, or toner is almost running out. |
Low: Toner |
The black toner cartridge is not set correctly, or toner is almost running out. |
Malfunction: Duplex Unit |
There is a problem with duplex unit. |
Malfunction:Lower Paper Tray(s) |
There is a problem with the Lower Paper Tray. |
Malfunction: Output Tray |
There is a problem with output tray. |
Memory Low: Data Storage |
Memory shortage has occurred while the document was being accumulated. |
Miscellaneous Error |
Other error has occurred. |
Mismatch: Paper Size |
Indicated paper tray does not contain paper of selected size. |
Mismatch: Paper Size and Type |
Indicated paper tray does not contain paper of selected size and type. |
Mismatch: Paper Type |
Indicated paper tray does not contain paper of selected type. |
Near Replacing: Fusing Unit |
Prepare the new fusing unit. |
Near Replacing: Int. Transfer |
Prepare the new Transfer Roller. |
Nearly Full: Log Data Capacity |
Log data capacity is nearly full. |
Nearly Full: Waste Toner Bottle |
Waste toner bottle is nearly full. |
No Paper: Selected Tray |
There is no paper in specified tray. |
No Paper: Tray 1 |
There is no paper in tray 1. |
No Paper: Tray 2 |
There is no paper in tray 2. |
No Paper: Tray 3 |
There is no paper in tray 3. |
Not Detected: Black Toner |
Black toner is not correctly set. |
Not Detected: Duplex Feed Unit |
The duplex feed unit is not correctly set. |
Not Detected: Duplex Unit |
The duplex unit is not correctly set. |
Not Detected: Fusing Unit |
The fusing unit is not correctly set. |
Not Detected: Input Tray |
The paper feed tray is not correctly set. |
Not Detected: Print Cartridge |
The paper print cartridge is not correctly set. |
Not Detected: Tray 1 |
Tray 1 is not correctly set. |
Not Detected: Tray 2 |
Tray 2 is not correctly set. |
Not Detected: Tray 3 |
Tray 3 is not correctly set. |
Not Detected: WasteToner Bottle |
Waste toner bottle is not correctly set. |
Not Reached, Data Deleted |
Unreached job is deleted. |
Not Reached, Data Stored |
Unreached job is preserved. |
Offline |
Printer is offline. |
Operating Thermo-range Error |
Exceeded appropriate thermo range. |
Panel Off Mode |
The printer is in Panel-Off mode. |
Paper in Duplex Unit |
The paper remains in the duplex unit. |
Paper Misfeed: Duplex Unit |
The paper has jammed in the duplex unit. |
Paper Misfeed: Input Tray |
The paper has jammed in the input tray. |
Paper Misfeed: Internal/Output |
The paper has jammed inside the printer. |
Paper Misfeed: Output Tray |
The paper has jammed in the output tray. |
Print Complete |
The print was completed. |
Printing... |
Printing is in progress. |
Proxy Address/Port Incorrect |
Proxy address or Port No. is incorrect. |
Proxy User/Password Incorrect |
Proxy user name or Password is incorrect. |
RC Gate Connection Error |
Failed connection with RC Gate. |
Ready |
The printer is ready to print. |
Renewing Remote Certificate |
Remote Certificate is Renewing. |
Replace Charger Kit |
It is time to replace the charger kit. |
Replace Cleaning Web |
It is time to replace the Cleaning Web. |
Replace Fusing Unit |
It is time to replace the fusing unit. |
Replace Int. Transfer Unit |
It is time to replace the transfer unit. |
Replace Maintenance Kit |
It is time to replace the Maintenance Kit. |
Reset IPDS fonts |
The IPDS fonts are being reset. |
SD Card Authentication failed |
SD card authentication failed. |
Supplies Order Call failed |
The supply order call has failed. |
Tray Error: Duplex Printing |
Selected paper tray cannot be used for duplex printing. |
Warming Up... |
The printer is warming up. |
For details about UNIX commands, see UNIX Supplement.
Check the error contents that may be printed in the configuration page. For details about printing a configuration page, see "List/Test Print Menu".