Skip header
ManualsContentsPreviousNextHelp

Top Page > Software Guide > Making Printer Settings Using the Control Panel > List/Test Print Menu > Interpreting the Configuration Page

Interpreting the Configuration Page

System Reference

Printer ID

Shows the serial number assigned to the board by its manufacturer.

Pages Printed

Shows the total number of pages printed by the printer to date.

Firmware Version

  • Firmware

    Shows the version number of the printer controller firmware.

  • Engine

    Shows the version number of the printer engine firmware.

  • NCS

    Shows the version number of the network interface board.

Device Connection

Shows the names of device options installed in the printer.

HDD:Font/Macro Download

Shows the hard disk status

Printer Language

Shows the version number of the printer language.

Connection Equipment

Shows the options attached to the printer.

Paper Input

Shows the current [Paper Input] settings.

For details, see "Paper Input Menu".

Reference

Maintenance

Shows the current [Maintenance] settings.

For details, see "Maintenance Menu".

Reference

System

Shows the current [System] settings.

For details, see "System Menu".

Reference

PCL Menu

Shows the current [PCL Menu] settings.

For details, see "PCL Menu".

Reference

PS Menu

Shows the current [PS Menu] settings.

For details, see "PS Menu".

Reference

PDF Menu

Shows the current [PDF Menu] settings.

For details, see "PDF Menu".

Reference

IPDS Menu

Shows the current [IPDS Menu] settings.

For details, see "IPDS Menu".

Reference

Host Interface

Shows the current [Host Interface] settings.

When DHCP is active on the network, the IPv4 address, subnet mask and gateway address appear in parentheses.

For details, see "Host Interface Menu".

Reference

Interface Information

Interface information is displayed.

User Paper Type

Registered user paper types are displayed.

Note

TopPreviousNext
Copyright (C) 2008