Menu Chart

This section explains how to change the default settings of the printer and provides information about the parameters included in each menu.

Mem. Erase Info

Displays data information inside the memory.

This menu can be selected only when the optional Data overwrite security unit is installed.

Sample Print

This menu appears only if the optional hard disk is installed.
The most recent 30 errors are stored in the [Error File(s)]. If a new error is added when there are 30 errors already stored, the oldest error is deleted. However, if the oldest error belongs to one of the following print jobs, it is not deleted. The error is stored separately until the number of those errors reaches 30. You can check any of these print jobs for error log information.
- Sample Print
- Locked Print
- Hold Print
- Stored Print
If the main power switch is turned off, the log is deleted.

Locked Print

Same as the [Sample Print] menu.

Hold Print

Same as the [Sample Print] menu.

Stored Print

Same as the [Sample Print] menu.

Paper Input

List/Test Print

Maintenance

[Del. All Temp], [Del. All Stored], and [HD Format] appears when the optional hard disk is installed.
[WL.LAN Signal] and [WL.LAN Defaults] appears when the optional Wireless LAN interface unit is installed.
[Reset IPDS Fonts] appears only when the optional IPDS unit is installed.

System

[Auto Del. Temp] [Auto Del.Stored] [Spool Printing] appears when the optional hard disk is installed.
[RAM Disk] appears only when the optional hard disk is not installed.

Host Interface

[Parallel I/F] appears when the optional IEEE 1284 interface unit is installed.
[Wireless LAN] appears when the optional Wireless LAN interface unit is installed.

PCL Menu

PS Menu

PDF Menu

IPDS Menu

Shutdown

Prepare the printer for power off. To prevent loss of stored data, be sure to shutdown the printer properly before turning off the power switch.

Language