ManualsContentsPreviousNext |
This section explains how to print on paper whose orientation and printing side are unchangeable (letterhead paper, for example).
When loading paper whose orientations are specified such as letterhead or letter paper, misprints may occur.
For appropriate print, press the [Menu] key using control panel and select [Letterhead Mode], [On (Always)] under [System] menu.
Select [Letterhead] as the paper type in the RPCS printer driver's settings when specifying [Auto Detect] or [Off] under [System] menu.
Refer to "Types of Paper and Other Media" for the letterhead print settings.
Paper Orientation |
Paper trays 1-3 |
Bypass Tray |
||
---|---|---|---|---|
Letterhead Mode [On] |
Letterhead Mode [Off] |
Letterhead Mode [On] |
Letterhead Mode [Off] |
|
1-sided print
|
||||
2-sided print
|
||||
1-sided print
|
||||
2-sided print
|
If you perform collated printing from a tray that is set for 2-sided printing, all printed after the first print will be output face-up instead of face-down, or vice versa. To ensure all paper is output facing the same direction, print from a tray that is not available for 2-sided printing.