Skip header
ManualsContentsPreviousNextHelp

Attaching the Duplex Unit

Important

  1. Check the contents of the box for the following items:

    Duplex unit illustration

  2. Turn off the power of the printer, and then unplug the power cable.

  3. Remove the adhesive tape and paper.

    Duplex unit illustration

    Duplex unit illustration

  4. Open the rear cover.

    Rear side of the printer illustration

  5. Lower the rear cover until it is horizontal, and then pull it away.

    Rear side of the printer illustration

    Proceed to step 7 if the paper tray cover is not installed.

  6. Pull the bottom of the paper tray cover (number) up slightly, and then remove the paper tray cover (number), in the order shown in the illustration.

    Rear side of the printer illustration

  7. Push in the duplex unit along the rails at the back of the printer.

    image

  8. Push the duplex unit securely into the printer.

    image

Note

Reference