Network Status

Link Status

Shows the type and speed of the network connection.

IPP Printer Name

Shows the name used to identify the machine on the network.

Network Version

Shows the version of the machine's network module (a part of the machine firmware).

MAC Address

Shows the MAC address of the machine.

DHCP

Select whether the machine should receive a dynamic IP address automatically using DHCP. To use DHCP, select [Enable]. When enabled, the items below cannot be configured.

IP Address

Enter the IP address for the machine.

Subnet Mask

Enter the subnet mask of the network.

Gateway

Enter the IP address of the network gateway.

Status

Shows whether the NetBIOS protocol is active.

Computer Name

Enter the display name for the machine on the NetBIOS network. Can contain up to 15 characters.

Workgroup Name

Enter the workgroup to which the machine will belong. Can contain up to 15 characters.