Skip headerimage
ContentsPreviousNextHelp

Changing PDL Settings

The procedure for changing the setting for duplex printing is described as an example.

  1. Press any menu key.

    image

  2. Press the [Up arrow key][Down arrow key] keys to select [PDL Settings], and then press the [OK] key.

    Menu            
    PDL Settings   
  3. Press the [Up arrow key][Down arrow key] keys to select [System], and then press the [OK] key.

    PDL Settings   
    System          
  4. Press the [Up arrow key][Down arrow key] keys to select [Duplex], and then press the [OK] key.

    System          
    Duplex          
  5. Press the [Up arrow key][Down arrow key] keys to select [Off], [Long Edge Bind], or [Short Edge Bind], and then press the [OK] key.

    Duplex          
              Off *

    The new setting is displayed with an "*" symbol, indicating that the setting has been changed.

  6. Confirm the current setting, and then press the [image] key.

  7. Press the [Clear/Stop] key to return to the initial screen.

    Note

    • Setting items preceded by numbers can be selected by pressing the corresponding number key, instead of using the [Up arrow key][Down arrow key] key.

    • You can press the [image] key to exit to the previous level of the menu tree.