



	Contents Previous Next

Top Page > Using the Fax Function > Sending a Fax > Specifying the Scan Settings > Specifying the resolution

Specifying the resolution

This section describes how to specify the resolution for scanning the original for the current job.

There are three resolution settings:

Standard

Select this when the original is a printed or typewritten document with normal-sized characters.

Fine

Select this when the original is a document with small print.

Photo

Select this when the original contains images such as photographs or shaded drawings.

Press the [Image Quality] key.
Press the [Image Quality] key or [][] keys to select the desired resolution setting, and then press the [OK] key.
- Press the [] key or [Clear/Stop] key to discard the current change and return to the initial screen.
- You can change the [Resolution] setting under [Fax Settings] to always scan with a specific resolution level.
- Temporary job settings are cleared in the following cases:
  - When no input is received for the period of time specified in [Auto Clear] while the initial screen is displayed.
  - When the [Clear/Stop] key is pressed while the initial screen is displayed.
  - When the machine's mode is changed.
  - When the power is turned off.
  - When the machine's default for the same setting is changed.
- For details about [Resolution], see Fax Settings.
- For details about [Auto Clear], see Administrator Settings.