Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ContentsPreviousNext | | |
This section provides information about the screen in fax mode.
The fax function is only available for the Type 2 and Type 3 models.
By default, the display shows the copier screen when the machine is turned on.
If the copy or scanner screen is shown on the display, press the [Facsimile] key on the control panel to switch to the fax screen.
Screen in standby mode
| Ready 31-07 Standard 23:30 |
First line:
Shows the current status of the machine and current month and date.
Second line:
Shows the current resolution setting and current time.
The machine's default mode at power on can be specified in the [Default Mode] setting under [Admin Settings].
The display format for time and date can be specified in [Date/Time Setup] under [Admin Settings].
For details about [Default Mode] or [Date/Time Setup], see Administrator Settings.
 |
 | Copyright (C) 2008 |
