Scanning from a computer (Windows)

The following procedure uses Windows XP and PageManager as an example.

1. Place the original on the exposure glass or in the ADF.

2. On the [Start] menu, point to [All Programs], point to [Presto! PageManager X.XX], and then click [Presto! PageManager X.XX].

   "X.XX" indicates the version of PageManager.

3. On the [File] menu, click [Select Source...].

4. In the [Select Source] dialog box, select the scanner, and then click [OK].

5. On the [Tool] menu, click [Scan Settings...].

6. Configure the scan settings as required, and then click [OK].

   For details, see the TWAIN driver Help or the manual for PageManager.

7. On the [File] menu, click [Acquire Image Data...].

8. On the [File] menu, click [Exit].

   

   • If there are two or more scanners on the network, make sure you have selected the correct scanner. If you have not, click [Select Source...] on the [File] menu, and select the scanner again.

   • You can use the launcher installed with PageManager to perform the following scan operations easily. For more details, see the manual for PageManager.

     • Scanning originals into another application.

     • Passing the scanned files to an OCR application.

     • Passing the scanned files to an email application to send as attachments.

     • Saving the scanned files in a preset folder.

   • The machine supports WIA scanning, an additional method of scanning originals from your computer, for USB connection. WIA scanning is possible if your computer is running a WIA-compatible application. For more information, see the manual for your application.