Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
When using hemmed paper, wrinkles and other problems may occur on paper.
Use the following procedure when copying or printing onto hemmed paper:
Use the bypass tray.
Make sure the paper is straight, and align the paper guides of the bypass tray to the paper size.
Load only one sheet at a time.
Remove each paper from the output tray and place it on a flat surface.
Due to the thickness of hemmed paper, image may be faint, blurred, or wrinkled, and paper jams may occur. You may be able to prevent this by copying or printing on the rear surface of the paper or feeding the bottom of the paper in first.
"Copying from the Bypass Tray", Copy/Document Server Reference
 |
 | Copyright (C) 2008 |
