Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This section describes specifications for the main unit.
Configuration:
Console
Photosensitivity type:
OPC drum
Original scanning:
Original feed image scanning over fixed contact image sensor
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Heating roll pressure system
Resolution:
Scanning originals: 600 dpi
Printing: 600 dpi
Original reference position:
Center
Warm-up time (23°C, rated voltage):
Less than 2 minutes
Originals:
Sheet
Maximum original size:
Metric version:
914 mm×30,000 mm
Inch version:
36"×1181" (98.4 ft.)
Paper size:
Type 1
Metric version:
Paper roll: 210×210 mm - 914×15,000 mm
Bypass tray: 210×182 mm - 914×2,000 mm
Inch version:
Paper roll: 81/2"×81/2"-36"×590.6"
Bypass tray: 81/2"×7.17"-36"×78"
Type 2:
Metric version:
Paper roll: 210×210 mm - 914×30,000 mm
Bypass tray: 210×182 mm - 914×2,000 mm
Inch version:
Paper roll: 81/2"×81/2" - 36"×1181"
Bypass tray: 81/2"×7.17" - 36"×78"
Paper weight:
52.3 - 110 g/m2 (13.9 - 29.3 lb.)
Non-reproduction area (Copier):
Metric version:
Top: Less than 8 mm
Bottom: Less than 8 mm
Left and Right 2 ± 2 mm (less than 5 mm on either side)
Inch version:
Top: Less than 0.32"
Bottom: Less than 0.32"
Left and Right 0.08" ± 0.08" (less than 0.19" on either side)
First copy/print time:
Type 1
Metric version:
A1
: 13 seconds (Paper bypass: 31 seconds)
Inch version:
D: 13 seconds (Paper bypass: 31 seconds)
Type 2
Metric version:
A1: 10 seconds (Paper bypass: 31 seconds)
Inch version:
D: 10 seconds (Paper bypass: 31 seconds)
Copying speed:
Type 1: 5 copies/minute (A0 (E) 
), 10 copies/minute (A1 (D) )
Type 2: 7 copies/minute (A0 (E) ), 14 copies/minute (A1 (D) )
Reproduction ratio:
Preset reproduction ratios:
Enlargement
Metric version |
Inch version (Engineering) |
Inch version (Architecture) |
|---|---|---|
400.0% |
400.0% |
400.0% |
282.8% |
258.8% |
266.7% |
200.0% |
200.0% |
200.0% |
141.4% |
129.4% |
133.3% |
Full size
Metric version |
Inch version (Engineering) |
Inch version (Architecture) |
|---|---|---|
100% |
100% |
100% |
Reduction
Metric version |
Inch version (Engineering) |
Inch version (Architecture) |
|---|---|---|
70.7% |
64.7% |
66.7% |
50.0% |
50.0% |
50.0% |
35.4% |
32.4% |
33.3% |
25.0% |
25.0% |
25.0% |
Zoom: From 25.0 to 400.0% in increments of 0.1%
Maximum continuous copy run:
99 sheets
Power consumption:
Main unit only
Type 1 |
Type 2 |
|
|---|---|---|
Warm-up |
2400 W |
3500 W |
Stand-by |
250 W |
250 W |
During printing |
1750 W |
2200 W |
Maximum |
2400 W |
3500 W |
Complete system
Type 1 |
Type 2 |
|
|---|---|---|
Warm-up |
2400 W |
3500 W |
Stand-by |
300 W |
300 W |
During printing |
1750 W |
2200 W |
Maximum |
2400 W |
3500 W |
The complete system consists of the main unit with roll feeder or paper cassette.
Dimensions (W × D × H):
1250×755×1200 mm, 49.2×29.7×47.2 inches (Upper output stacker and rear output tray not included.)
Space for main unit (W × D):
1250×755 mm, 49.2×29.7 inches
Noise emission:
Sound power level:
Type 1 |
Type 2 |
|
|---|---|---|
Stand-by |
Less than 57 dB (A) |
Less than 66 dB (A) |
Copying |
Less than 73 dB (A) |
Less than 76 dB (A) |
Sound pressure level:
Type 1 |
Type 2 |
|
|---|---|---|
Stand-by |
Less than 51 dB (A) |
Less than 60 dB (A) |
Copying |
Less than 67 dB (A) |
Less than 70 dB (A) |
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound power level and sound pressure level are measured from the position of the bystander.
Weight:
Approx. 295 kg, 649 lb.
 |
 | Copyright (C) 2008 |
