![]() ![]() | ![]() | ||
This machine has labels for
WARNING and
CAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated.

1

Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be taken when removing misfed paper.

2

Do not touch the parts a label indicates. The inside of the machine could be very hot. Caution should be taken when removing misfed paper. The higher temperature (145°C) applies to plain paper. Translucent paper can cause the indicated part to reach 160°C.
3

The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.

4

Pressing the auto feed button causes the feed roller to revolve, as shown, when replacing the paper roll or clearing paper jams. Be careful your hands or clothing do not get caught in the feed roller as it is revolving. This could result in severe injury.
5 (This label is affixed to the back of the cover.)

There is a cutter blade inside. When replacing or loading the paper roll, or clearing paper jams, do not touch the parts this label indicates. Otherwise an injury may result.
6

Hold the paper roll horizontally with both hands. When you grab the paper holder and hold the paper roll vertically, the paper roll may fall off and an injury may result.

7

The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.
8

The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.
9

The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.

10

The inside of the machine could be very hot. Do not touch the parts a label indicates. Otherwise, an injury might occur.

11

The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.

12

The inside of the machine could be very hot. Do not touch the parts which a label is put on. Otherwise, an injury might occur.