



	Manuals Contents Previous Next

Top Page > About This Machine > Read This First > Safety Information > Safety Precautions to be Followed > Handling power cords and power plugs

Handling power cords and power plugs

This section explains safety precautions about handling power cords and power plugs.

Connect this machine only to a power source that matches the specifications shown on the inside front cover of this manual and do not use an extension cord.
Use of this machine with extension cords and power sources other than those that match the specifications shown constitutes an electric shock and fire hazard.

Power cords that are damaged, broken, modified, trapped under heavy objects, pulled hard, or bent severely are electric shock and fire hazards.

Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged.
If the power cord is damaged (exposure of the core, disconnection, etc.), contact your service representative to change a new one. Operating the machine with a damaged power cord may cause an electric shock or fire.
It is dangerous to handle the plug with wet hands. Doing this may result in receiving an electric shock.

Touching the prongs of the power cable's plug with anything metallic constitutes a fire and electric shock hazard.

When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

To disconnect the power cord, pull it out by plug. Do not drag the cord itself. Doing so may result in damage to the cord, leading to fire or electric shock.
For safety reason, unplug the power cord from the wall outlet if the machine will not be used for an extended period of time such as holidays.

Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.