System

Select this to have an error report printed when a printer or memory error occurs.

The default setting is [Off].

You can select this to enable Auto Continue. When it is On, printing continues after a system error occurs.

The default setting is [Off].

Select this to have a memory overflow error report printed.

The default setting is [Do not print].

Specify whether to rotate the print image 180 degrees relative to the paper orientation.

The default setting is [Off].

You can select to have print on both sides of each page.

The default setting is [Off].

You can specify the number of print sets. This setting is disabled if the number of pages to print has been specified with the printer driver or another command.

The number of copies can be specified from 1 to 999 by increments of one.

The default setting is "1" copies.

You can select whether or not to print blank pages.

The default setting is [On].

Pages that match one of the following conditions are identified as blank.

• There are no images.

• There are images but they are outside the printable area.

• There are only blank characters.

You can enable the Auto Substitute Paper Size (A4, LT) feature.

The default setting is [Auto].

You can select the default paper size.

• The paper size you can select is as follows:

A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, C5 Env, C6 Env, DL Env, 1218, 1117, 8¹/₂14, 8¹/₂13, 8¹/₂11, 8¹/₄13, 813, 7¹/₄10¹/₂, 5¹/₂8¹/₂, 4¹/₈9 ¹/₂, 3 ⁷/₈7¹/₂, 8K, 16K, Custom Size

The default setting is A4.

The default setting is 8¹/₂11.

You can rotate original images when printing.

When printing, original images are always rotated by 180 degrees. Therefore, output might not be as expected when printing onto letterhead or preprinted paper requiring orientation. Using this function, you can specify image rotation.

The default setting is [Off].

• Off

  When set to [Off], original images are rotated by 180 degrees.

• Auto Detect

  When set to [Auto Detect], the machine detects a letterhead or preprinted paper automatically, and does not rotate the image.

• On (Always)

  When set to [On (Always)], the machine does not rotate.

This function reduces printing speed.

Specify whether (Printer) Driver/Command or Machine Settings, has priority for determining the paper size for the bypass tray.

The default setting is [Driver/Command].

You can select whether or not to print on the entire sheet.

The default setting is [Off].

You can specify whether or not the machine automatically switches paper trays if paper of the specified size and type is not loaded in the driver-designated tray.

The default setting is [Off].

This setting enables the machine to switch paper trays automatically, regardless of whether the tray is manually or automatically selected.

When set to [On], [Auto Tray Switching] is enabled and the [Auto Tray Switching] setting configured in the printer driver is overridden.

The default setting is [Off].