Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
Follow the procedure below to set the machine using the control panel when loading custom size paper onto the bypass tray.
The following procedures are not required if you select [Driver/Command] from [Bypass Tray Priority] in [System] of [Printer Features] (see "Printer Features"). In that case, set the paper size using the printer driver.
If you select [Machine Settings] from [Bypass Tray Priority] in [System] of [Printer Features] (see "Printer Features"), the settings made using the control panel have priority over the printer driver settings.
If the printer driver is not used, select [Machine Settings] from [Bypass Tray Priority] in [System] of [Printer Features] (see "Printer Features"). Set paper size using the control panel.
Press the [User Tools/Counter] key on the control panel.
Press the [
] or [
] key to select [System Settings], and then press the [OK] key.
Press the [] or [] key to select [Tray Paper Settings], and then press the [OK] key.
Press the [] or [] key to select [Printer Bypass Paper Size], and then press the [OK] key.
Press the [], [], [
], or [
] key to select the [Custom Size], and then press the [OK] key.
Press the [] or [] key to enter the horizontal value, and then press the [OK] key.
Press the [] or [] key to enter the vertical value, and then press the [OK] key.
Press the [User Tools/Counter] key to return to the initial screen.
When loading thick paper, thin paper, or OHP transparencies, set paper size and paper type.
[Auto Detect] is the default setting for [Printer Bypass Paper Size].
For details about setting printer drivers, see the printer driver Help.
 |
 | Copyright (C) 2008 |
