Using SmartDeviceMonitor for Admin

Using SmartDeviceMonitor for Admin, you can monitor the network printers. Also, you can change the configuration of the network interface board using TCP/IP or IPX/SPX.

IPv6 cannot be used on this function.
IPX/SPX (NetWare) cannot be used under Windows Vista and Windows Server 2008.
NetWare is disabled in the factory default setting. Enable NetWare by changing the "NetWare" settings in Web Image Monitor, or by using the set command in telnet. For details, see Web Image Monitor Help, or "Remote Maintenance by telnet".

Protocol stack provided with Operating System

Windows 2000
TCP/IP
IPX/SPX
NetWare
Novell Client
Windows Server 2003/2003 R2
TCP/IP
IPX/SPX
Novell Client
Windows Server 2008
TCP/IP
Windows XP
TCP/IP
IPX/SPX
Novell Client
Windows Vista
TCP/IP

Available operations

The following functions are available:

Limits settings done from the control panel, and disables changes made to certain items.
Enables selection of paper type loaded in the machine.
Switches to, and comes out of Energy Saver mode.
Checks information about printing, paper quantity, etc.
Simultaneously monitors multiple printers. When there are many printers, you can create groups and classify printers to facilitate management.
Checks the machine's network settings and detailed device information.
Enables you to change the machine's network settings.
You can check details of print jobs sent from a computer.
Allows you to check job histories of printed, faxed (LAN-Fax), scanned, and photocopied documents identified by user codes.
Allows selection of functions such as printing and scanning for each user code.
Fax numbers stored in the machine can be changed and saved by computer.
You can check each fax job history entry.
You can make settings for and display the status changes of group devices.
Using Address Management Tool, you can manage LAN-Fax numbers.