



	Manuals Contents Previous Next

Top Page > Network and System Settings Guide > Connecting the Machine > Network Settings Required to Use Network TWAIN Scanner > Ethernet

Ethernet

This section lists the settings required to use the network TWAIN Scanner with an Ethernet connection.

For details about how to specify the settings, see "Interface Settings".

Menu	User Tool	Setting Requirements
Interface Settings / Network	Machine IPv4 Address	Necessary
Interface Settings / Network	DNS Configuration	As required
Interface Settings / Network	DDNS Configuration	As required
Interface Settings / Network	IPsec	As required
Interface Settings / Network	Domain Name	As required
Interface Settings / Network	WINS Configuration	As required
Interface Settings / Network	Effective Protocol	Necessary
Interface Settings / Network	Ethernet Speed	As required
Interface Settings / Network	IEEE 802.1X Auth. (Ethernet)	As required
Interface Settings / Network	Permit SNMPv3 Communictn	As required
Interface Settings / Network	Permit SSL/TLS Comm.	As required
Interface Settings / Network	Host Name	As required

For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

Interface Settings