![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes how to program the Realm.
Press the [User Tools/Counter] key.
Select [System Settings] using [] or [
], and then press the [OK] key.
Select [Administrator Tools] using [] or [
], and then press the [OK] key.
Select [Prog./Change/Delete Realm] using [] or [
], and then press the [OK] key.
Select [Program/Change] using [] or [
], and then press the [OK] key.
Select [*Not Programmed] using [] or [
], and then press the [OK] key.
Select [Realm Name], [KDC Server Name], or [Domain Name] using [] or [
], and then press the [OK] key.
If you select [Realm Name], proceed to step 8.
If you select [KDC Server Name], proceed to step 9.
If you select [Domain Name], proceed to step 10.
Enter the Realm Name, and then press the [OK] key.
Enter the realm name, or host name.
You can enter a realm name using up to 64 characters.
If you enter the realm name, proceed to step 11.
Enter the KDC Server Name, and then press the [OK] key.
Enter the KDC server name, host name, or IPv4 address.
You can enter a KDC server name using up to 64 characters.
If you enter the KDC server name, proceed to step 11.
Enter the Domain Name, and then press the [OK] key.
Enter the domain name, or host name.
You can enter a domain name using up to 64 characters.
Press the [User Tools/Counter] key.