Changing Default Settings

This section describes how to change the settings of User Tools.

If Administrator Authentication Management is specified, contact your administrator.

Press the [User Tools/Counter] key.
Select [System Settings] using the [] or [], and then press the [OK] key.
Change settings by following instructions on the display, and then press the [OK] key.

Press the [Escape] key to return to the previous display.
To cancel changes made to settings and return to the initial display, press the [User Tools/Counter] key.
For details about specifying System Settings, see "System Settings".
For details about specifying other settings such as adjusting gradation, see "Auto Color Calibration", Troubleshooting.
For details about specifying other settings such as adjusting color registration, see "Adjusting the Color Registration", Troubleshooting.
For details about specifying other settings such as setting plain paper, see "Changing Paper Thickness Settings", About This Machine.
For details about specifying other settings such as setting changing the language, see "Changing the Display Language", About This Machine.
For details about specifying other settings such as checking counter, see "Displaying the Total Counter", About This Machine.
For details about specifying other settings such as checking inquiry, see "Inquiry", About This Machine.