



	Manuals Contents Previous Next

Top Page > About This Machine > Adding Toner > Adding Toner > Sending Fax Documents When Toner Has Run Out

Sending Fax Documents When Toner Has Run Out

When the machine has run out of toner, the indicator on the display lights. Note that even if there is no toner left, you can still send fax documents.

If number of communications executed after the toner has run out and not listed in the automatically output Journal exceeds 100, communication is not possible.

Make sure the machine is in facsimile mode.
Press [Exit], and then perform transmission operation.
The error message disappears.

Any reports are not printed.
If the fax screen does not appear in step 1, press the [Facsimile] key.