Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This report is printed when a document could not be successfully transmitted with Memory Transmission.
If the machine is set up to print a Communication Result Report, this report is not printed. Use it to keep a record of failed transmissions so you can send them again.
You can select whether the Communication Failure Report is automatically printed using the User Parameter (switch 04, bit 1) in the Fax Features menu.
This report is only printed if the Communication Result Report is turned off and a document could not be successfully transmitted with Memory Transmission.
You can select whether to include part of the original image on the report with the User Parameter (switch 04, bit 7) in the Fax Features menu.
If user authentication is set, you can select whether to display a destination with the User Parameter (switch 04, bit 4) in the Fax Features menu.
If user authentication is set, you can select whether to display a sender name with the User Parameter (switch 04, bit 5) in the Fax Features menu.
For details about Parameter Setting, see "Parameter Settings".
The Pg(s) column gives the total number of pages. The Page Not Sent column gives the number of pages that could not be sent successfully.
"Unprogrammed" indicates that the document could not be sent because the forwarding destination is not programmed.
 |
 | Copyright (C) 2008 |
