![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
For details about setting parameters, see "Parameter Settings".
Do not change switches other than those listed.
Switch: 00, Bit: 3, 2, 1
Allows one of five image density steps to be set as the home position.
000: Normal density
001: The lightest density
010: The darkest density
101: Lighter density
110: Darker density
Switch: 00, Bit: 5, 4
Allows Standard, Details, or Fine to be set as the home position.
00: Standard
01: Detail
10: Fine
Switch: 01, Bit: 1, 0
Allows Text, Photo, or Text / Photo to be set as the home position.
00: Text
01: Photo
11: Text / Photo
Switch: 02, Bit: 0
Allows the transmission stamp as the home position to be set to on or off.
0: Off
1: On
Switch: 02, Bit: 1
Allows either Immediate Transmission or Memory Transmission to be set as the home position.
0: Memory transmission
1: Immediate transmission
Switch: 02, Bit: 2
Allows the label insertion as the home position to be set to on or off.
0: Off
1: On
Switch: 02, Bit: 4
Allows the auto reduce as the home position to be set to on or off. When set to on, if the receiver's paper is smaller than the paper you are sending on, the document is automatically reduced to fit onto the paper available at the other end.
If you turn this function off, the scale of the original is maintained and some parts of the image may be lost at the other end.
0: Off
1: On
Switch: 02, Bit: 6, 5
Allows the fax header as the home position to be set to on or off.
00: Off
01: On