Auto Reduce/Enlarge

The machine automatically detects the original size and then selects an appropriate reproduction ratio based on the paper size you select.

Illustration of Auto Reduce/Enlarge

You cannot use the bypass tray with this function.
If you select a reproduction ratio after pressing [Auto R/E], Auto Reduce/Enlarge is canceled and the image cannot be rotated automatically.

This is useful to copy different size originals to the same size paper.

If the orientation in which your original is placed is different from that of the paper you are copying onto, the machine rotates the original image by 90 degrees and fits it on the copy paper (Rotate Copy). For example, to reduce A3 (11 × 17) originals to fit onto A4 (8¹/₂ × 11) paper, select a paper tray containing A4 (8¹/₂ × 11) paper, and then press [Auto R/E]. The image is automatically rotated.

Illustration of Auto Reduce/Enlarge

For details about Rotate Copy, see "Rotate Copy".

The original sizes and orientations you can use with this function are as follows:

Metric version

Original location	Original size and orientation
Exposure glass	A3, B4 JIS, A4, B5 JIS, A5, 8 × 13
ADF	A3, B4 JIS, A4, B5 JIS, A5, 11 × 17, 8¹/₂ × 11, 8 × 13, 8K, 16K

Inch version

Original location	Original size and orientation
Exposure glass	11 × 17, 8¹/₂ × 14, 8¹/₂ × 11
ADF	A3, A4, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 11, 5¹/₂ × 8¹/₂, 10 × 14, 7¹/₄ × 10¹/₂

Press [Auto R/E].
Select the paper size using [] or [].
Place the originals, and then press the [Start] key.

You can place originals of different sizes in the ADF at once.
The machine selects reproduction ratios of between 25 - 400%.

Rotate Copy