



	Manuals Contents Previous Next

Top Page > Troubleshooting > Clearing Misfeeds > Removing Jammed Paper

Removing Jammed Paper

This section describes how to locate and remove jammed paper.

The inside of the machine could be very hot. Do not touch any parts other than specified in this document when removing misfed paper. Otherwise, it may cause burn injury.

The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper.

Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

When clearing misfeeds, do not turn off the operation switch. If you do, your copy settings will be lost.
To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
Contact your service representative if misfeeds occur frequently.

Related topics

Locating Jammed Paper
Removing Jammed Paper