Skip header
 

Top Page > Troubleshooting > Clearing Misfeeds > Removing Jammed Staples

Removing Jammed Staples

This section describes how to remove jammed staples.

CAUTION

  • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

Important

  • Curled paper may cause staples to jam. To avoid this, turn paper over in the tray.

  • When the finisher is installed, after removing jammed staples, staples will not be ejected the first few times you try to use the stapler.

Note

  • Remove the jammed staples according to the finisher type. Check the type if you are unsure. For details about type of finisher, see "Appendix", About This Machine Illustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

Operation procedure illustration