Operations Are Not Possible When Messages Are Displayed
This section describes likely causes of and possible solutions for messages that appear and when the machine fails to operate.
Message |
Cause |
Solution |
|---|---|---|
“Destination list / machine settings are updated. Selected destinations or function settings have been cleared. Please re-select the settings.” |
The destination list is being updated from the network using SmartDeviceMonitor for Admin. Depending on the number of destinations to be updated, there may be some delay before you can resume operation. Operations are not possible while this message is displayed. |
Wait until the message disappears. Do not switch off the power while this message is displayed. |
