Skip header
 

Adjusting the Volume

This section describes how to adjust the volume.

You can change the volume of the following sounds that the machine makes.

On Hook Mode

Heard when [On Hook] is pressed.

At Transmission

Heard when "Immediate Transmission" is performed.

At Reception

Heard when the machine receives a document.

At Dialing

Heard after pressing the [Start] key, until the line connects to the destination.

At Printing

Heard when a received document is printed.

1Press the [User Tools / Counter] key.

User Tools/Counter key illustration

2Press [Facsimile Features].

3Check that [General Settings] screen appears.

4Press [Adjust Sound Volume].

Operation panel screen illustration

5Press [Lower] or [Louder] to adjust the volume, and then press [OK].

Operation panel screen illustration

You can hear the actual volume by pressing [Check].

If you press [Cancel], the volume setting is canceled. The display returns to that of step 4.

You can set the volume level to between 0 and 7.

6Press the [User Tools / Counter] key.

The standby display appears.

Note

  • You can adjust the On Hook volume when you press [On Hook]. See "On Hook Dial", Facsimile Reference Illustration indicating instructions stored on a CD-ROM.