Preparation for Sending by Scan to Folder
To send scanned files by Scan to Folder, you must first perform the following:
Check the machine is properly connected to the network
Configure the network settings in [System Settings]
Configure the necessary settings in [Scanner Features]
If necessary, configure the shared folders, FTP server, and Netware server on the network in advance.
Files can be sent by SMB in NetBIOS over TCP/IP environments only. Files cannot be sent by SMB in NetBEUI environments.
Scan to Folder is still possible even if sending by SMB or FTP is disabled from the control panel, Web Image Monitor, or Telnet etc.
