Skip header
ManualsContentsPreviousNextHelp

In other cases

Add the IP address and host name of the network printer to the hosts file on the computer used for printing. Methods of addition vary depending on operating systems.

  1. Open the hosts file using memo pad files, for instance.

    The hosts file is in the following folder:

    \WINNT\SYSTEM32\DRIVERS\ETC\HOSTS

    "\WINNT" is the directory of the installation destination for Windows 2000/XP/Vista, and Windows Server 2003/2003 R2/2008.

  2. Add an IPv4 or IPv6address and host name to the hosts file using the following format:

    192.168.15.16  host  # NP

    "192.168.15.16" is the IPv4 address, "host" is the printer's host name, and "#NP" is replaced by comments. Insert a space or tab between "192.168.15.16" and "host", between "host" and "#NP" respectively, using one line for this format.

    2001:DB::100 host # NP

    "2001:DB::100" is the IPv6 address, "host" is the printer's host name, and "#NP" is replaced by comments. Insert a space or tab between "2001:DB::100" and "host", between "host" and "#NP" respectively, using one line for this format.

  3. Save the file.

Note