ManualsContentsPreviousNext |
Use the "bonjour" command to display bonjour-related settings.
View settings
Bonjour settings are displayed.
msh> bonjour
Bonjour service name setting
You can specify the Bonjour service name.
msh> bonjour cname "computer name"
The computer name can be entered using up to 63 alphanumeric characters.
If you do not specify a character string, the current setting is displayed.
Bonjour Installation location information setting
You can enter information about the location where the printer is installed.
msh> bonjour location "location"
Information about location can be entered using up to 32 alphanumeric characters.
If you do not specify a character string, current setting is displayed.
Setting order of priority for each protocol
msh> bonjour diprint [0-99]
msh> bonjour lpr [0-99]
msh> bonjour ipp [0-99]
You can specify the order of priority for "diprint", "lpr", and "ipp". Smaller numbers indicate higher priority.
IP TTL setting
msh> bonjour ip ttl [1-255]
You can specify the IP TTL (the number of routers a packet can pass through).
The default is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname|location}
cname: Reset the computer name. The default computer name will be displayed when the computer is restarted.
location: Reset the location information. The previous location information will be deleted.
Interface configuration
msh> bonjour linklocal "interface_name"
If you do not specify an interface, the Ethernet interface is selected automatically.
If many types of interface are installed, configure the interface that communicates with linklocal address.
If you do not specify an interface, the Ethernet interface is automatically selected.
wlan can be specified only when the IEEE 802.11 interface is installed.
Interface |
Interface configured |
---|---|
ether |
Ethernet interface |
wlan |
IEEE 802.11 interface |
Setting IPP-SSL printing
msh> bonjour ippport {ipp|ssl}
If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can be performed with higher security.
If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for normal IPP printing.