ManualsContentsPreviousNext |
This section describes how to setup wireless LAN interface.
Set up wireless LAN according to the following procedure:
Select [802.11 Ad-hoc Mode] when connecting Windows XP as a wireless LAN client using Windows XP standard driver or utilities, or when not using the infrastructure mode.
When [802.11 Ad-hoc Mode] is selected in Communication mode, select the channel for [Ad-hoc Channel]. Set a channel that matches the type of wireless LAN being used. For details about setting the Ad-hoc Channel, see "Interface Settings ".
You can specify either "WEP" or "WPA" to the Security Method.
Specify "WPA", when [Communication Mode] is set to [Infrastructure Mode].
If you select the [WPA] option for Security Method, select one of the following: [WPA-PSK], [WPA], [WPA2-PSK], or [WPA2]. If you select [WPA-PSK] or [WPA2-PSK], enter your PSK. If you select [WPA] or [WPA2], authentication settings and certificate installation settings are required. For details about setting methods, see "Configuring IEEE 802.1X".
For details about how to specify wireless LAN settings from the control panel on the machine, see "Interface Settings".