slp

Use the “slp” command to view and configure SLP settings.

msh> slp ttl “ttl_val[1-255]”

You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1. Using the “slp” command, you can configure the value of TTL which can be used by SLP multicast packet.
The default value of TTL is 1. A search is executed only within a local segment. If the router does not support multicast, the settings are not available even if the TTL value is increased.
The acceptable TTL value is between 1 and 255.