Skip header
 

Top Page > Network and System Settings Guide > Using a Printer Server > Using NetWare > Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5)

Setting Up as a Print Server (NetWare 4.x, 5/5.1, 6/6.5)

Follow the procedure below to connect the machine as a print server using NetWare 4.x, NetWare 5/5.1, or NetWare 6 / 6.5.

Important

  • When using the printer as a print server in NetWare 4.x, NetWare 5/5.1, or NetWare 6/6.5, set it to the NDS mode.

  • When using NetWare 5/5.1 or NetWare 6/6.5, set the printer as a print server.

1Start Web Image Monitor.

2Click [Login].

A dialog box for entering the login user name and password appears.

3Enter the login user name and password, and then click [Login].

For details about the login user name and password, consult your network administrator.

4Click [Configuration] in the left area, and then click [NetWare Print Settings].

5Confirm the settings, and then click [Device Name].

Configuration is now complete. Wait several minutes before restarting Web Image Monitor.

6Click [Logout].

7Quit Web Image Monitor.

Note

  • To check the configuration is correct, enter the following from the command prompt:

    F:> USERLIST

  • If the printer works as configured, the name of the print server appears as a connected user.

  • If you cannot identify the printer you want to configure, check the printer name against the configuration page printed from the printer. If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer. Use the [Network] dialog box of Windows to change the frame type of the computer.

  • For details about Web Image Monitor, see “Using Web Image Monitor”.

  • For details about login user names and passwords, see Security Reference, which is the administrator's manual.

Reference