Skip header
 

Programming the Realm

This section describes how to program the Realm.

1Press the [User Tools/Counter] key.

2Press [System Settings].

3Press [Administrator Tools].

4Press [Down arrow keyNext] twice.

5Press the [Program / Change / Delete Realm].

6Check that [Program / Change] is selected.

Operation panel screen illustration

7Press [*Not Programmed].

8Press [Change] under "Realm Name".

Operation panel screen illustration

9Enter the realm name, and then press [OK].

Enter the realm name, or host name.

You can enter a realm name using up to 64 characters.

10Press [Change] under “KDC Server Name”.

11Enter the KDC server name, and then press [OK].

Enter the KDC server name, host name, or IPv4 address.

You can enter a KDC server name using up to 64 characters.

12Press [Change] under “Domain Name”.

13Enter the domain name, and then press [OK].

Enter the domain name, or host name.

You can enter a domain name using up to 64 characters.

14Press [OK].

15Press [Exit].

16Press the [User Tools/Counter] key.