Skip header
 

Changing Paper Thickness Settings

Select [Plain Paper 1] or [Plain Paper 2] depending on the type of plain paper.

If in System Settings, [Tray Paper Settings], you set “Paper Thickness” to [Plain Paper] for each tray's [Paper Type], you must then select [Maintenance], [Plain Paper Setting] and specify either [Plain Paper 1] or [Plain Paper 2], depending on the thickness of the loaded paper.

The default setting is Plain Paper 2.

Important

  • Select [Plain Paper 1] when paper weight is between 60 g/m2 (16 lb.) and 74 g/m2 (20 lb.).

  • Select [Plain Paper 2] when paper weight is between 74.1 g/m2 (20 lb.) and 90 g/m2 (24 lb.).

1Press the [User Tools/Counter] key.

User Tools/Counter key illustration

2Press [Maintenance].

Operation panel screen illustration

3Press [Plain Paper Setting].

Operation panel screen illustration

4Select the plain paper type for each tray depending on the paper to be set and press [OK].

Operation panel screen illustration

5Press [Exit].

Operation panel screen illustration

6Press [Exit].

Note

  • If in System Settings, [Tray Paper Settings], you set “Paper Thickness” to [Plain Paper] for each tray's [Paper Type], you must then select [Maintenance], [Plain Paper Setting] and specify either [Plain Paper 1] or [Plain Paper 2], depending on the thickness of the loaded paper. In System Settings, [Tray Paper Settings], for each tray's [Paper Type] you can specify [Plain Paper], [Middle Thick], [Thick Paper 1], [Thick Paper 2], or [Thick Paper 3]. For details about paper thickness, see “Recommended Paper Sizes and Types”.