Saving Energy
This section explains the machine's energy saving functions.
This machine has the following energy saving functions.
Energy Saver
If you do not use the machine for a certain period after an operation, or when you press the [Energy Saver] key, the display disappears and the machine goes into Energy Saver mode. When you press the [Energy Saver] key again, the machine returns to the ready condition. The machine uses less electricity in Energy Saver mode.
You can change the amount of time the machine waits before switching to Energy Saver mode after copying has finished or the last operation is performed under Energy Saver Timer.
Auto Off
The machine automatically turns itself off when the job is finished, after a certain period of time has elapsed. This function is called “Auto Off”.
You can change the Auto Off time under Auto Off Timer.
See “System Settings”, Network and System Settings Guide
.The Energy Saver and Auto Off functions will not operate in the following cases:
When a warning message appears
When the service call message appears
When paper is jammed
When the cover is open
When the “Add Toner” message appears
When toner is being replenished
When the User Tools/Counter/Inquiry screen is displayed
When fixed warm-up is in progress
When data is being processed
When operations are suspended during printing
When the On-hook dialing function is in use
When a recipient is being registered in the address list or group dial list
When the Data In indicator is on or blinking
When the screen of stored document under the printer function is displayed
