Skip headerimage
ManualsContentsPreviousNextHelp

While the Original Is Being Transmitted

This section explains how to cancel a transmission while the Communicating indicator is lit.

  1. Press the [Clear/Stop] key.

    Clear/Stop key illustration

    The screen shown in step 2 can also be displayed by pressing [Check / Stop Transmission File] under [Change TX / Info].

  2. Select the file you want to cancel.

    Operation panel screen illustration

    If the desired file is not shown, press [Up arrow key] or [Down arrow key] to find it.

    There are cases when a destination may not be selected as the destination appears as "Asterisk", depending on the security settings.

  3. Press [Stop Transmission].

    Operation panel screen illustration

  4. Press [OK].

    Operation panel screen illustration

    To cancel another file, repeat steps 2 through 4.

    To cancel stopping transmission, press [Cancel].

  5. Press [Exit].

    Operation panel screen illustration

    After pressing [Check / Stop Transmission File] under [Change TX / Info] in step 1, press [Exit] twice.

    The standby display appears.

Note