Skip headerimage
ManualsContentsPreviousNextHelp

Sending originals using the exposure glass (Memory Transmission)

This section explains how to send originals by Memory Transmission using the exposure glass.

  1. Make sure [Immed. TX] is not highlighted.

  2. Place the first page of the original face down on the exposure glass.

  3. Specify a destination.

  4. Make the scan settings you require.

  5. Press the [Start] key.

    The machine starts scanning.

  6. Place the next original on the exposure glass within 60 seconds when you send multiple originals, and then repeat steps 4 and 5.

    Repeat this step for each page.

    Operation panel screen illustration

  7. Press the [Sharp] key.

    The machine dials the destination and starts transmission.