Changing the User Parameters
This section describes how to set parameters.
Access to some User Parameter Settings may require options, or other settings may need to be made beforehand.
It is recommended that you print and keep a User Parameter list when you program or change a User Parameter.
Do not change any bit switches other than those shown on the previous pages.
Press [Facsimile Features].
Press [Initial Settings].
Press [Parameter Setting].
Select the switch number you want to change.
Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat from step 5 to change another bit number for the same switch.
Press [OK].
To cancel these settings, press [Cancel]. The display returns to that of step 4.
Repeat step 4 through step 5 to change the switch settings.
After all the settings are finished, press [Exit].
Press the [User Tools/Counter] key.
