This section describes the user tools in the General Settings menu under Facsimile Features.
Quick Operation Key (1-3)
Frequently used functions programmed as Quick Operation keys are shown on the menu immediately after the power is turned on.
If [On] is selected, the Quick Operation keys can be programmed with the following items:
On
Manual E-mail RX
Send Later
Subject
Text
Recept. Notice
E-mail TX Results
BCC transmission
Std. Message
Fax Header Print
Label Insertion
Closed Network
SUB Code TX
SEP Code Reception
Stamp
Print Memory Lock
TX File Status
RX File Status
Journal
Print Stored RX File
TX Status Report
Forwarding
Switch RX Mode
Off
Up to three functions can be programmed to Quick Operation keys.
Functions that appear dimmed have already been set.
The default setting for Quick Operation key 1 has not been set.
The default setting for Quick Operation key 2 is TX File Status.
The default setting for Quick Operation key 3 is RX File Status.
Switch Title
Select the title to be shown on the destination list.
The default setting is Title 1.
Search Destination
Select a destination list to be used in “Search Destination”.
You can select from the Address Book, or a registered LDAP Server.
To search from an LDAP server, it is necessary to register the LDAP server in [System Settings] and set [LDAP Search] to [On].
The default setting is Address Book.
For details about “LDAP Search”, see “System Settings”, Network and System Settings Guide.
Communication Page Count
Checks the transmission and reception, and totals on the display.
Pages Sent:
Total number of transmitted pages
Pages Received:
Total number of received pages
Press [Facsimile Features].
Press [General Settings].
Press [Communication Page Count].
After checking the display, press [Exit].
Press the [User Tools/Counter] key.
Adjust Sound Volume
Adjust the sound volume during On Hook Mode and Immediate Transmission.
The default setting for sound volume is level 2.
Box Setting
The following functions are for delivery and transfer of documents:
Personal Box
Information Box
Transfer Box
For details about Box Setting, see “Box Settings”.
Box Setting: Print List
You can print a list of the currently registered Personal Boxes, Information Boxes, and Transfer Boxes.
On Hook Mode Release Time
Use this function to specify a time to cancel On Hook mode after you transmit using On Hook dialing.
The default setting is 3 minutes.