Making settings for option configuration
Make settings for optional units installed in this machine.
On the [Start] menu, select [Control Panel]. Then select [Printers and Other Hardware], and then [Printers and Faxes].
In Windows 2000, point to [Settings] on the [Start] menu, and then click [Printers].
In Windows XP Professional or Windows Server 2003/2003 R2, select [Printers and Faxes] on the [Start] menu.
In Windows Vista or Windows Server 2008, select [Control Panel] on the [Start] menu. Then select [Hardware and Sound], and then [Printers].
Select to highlight [LAN-Fax M8], then click [Properties] on the [File] menu.
Click the [Accessories] tab, and then make the settings for the option configuration.
When the machine is connected to a network, option configuration is automatically performed. If the settings do not match the installed optional units, click [Load from Device].
When this machine is connected locally to your computer, select the check boxes for the installed optional units.
Click [Apply].
Option configuration settings are complete.
Click [OK].
[Accessories] tab
The [Accessories] tab contains the following items besides option configuration items.
Prohibit manual destination entry
Check this option to inhibit direct destination specification.
Enable E-mail
Check this when using Internet Fax with the LAN-Fax function.
IP-Fax
Check this option when using IP-Fax.
After checking this option, select a protocol by clicking an appropriate radio button.
If the options on this machine are not configured as instructed, LAN-Fax functions may fail.
When this machine is connected to a network and the port is set via the âSmartDeviceMonitor for Clientâ port, option configuration is automatically performed. For details about automatic option configuration, see LAN-Fax Deriver's Help.
