Skip header
 

Auto Reduce

When this function is turned on, if the receiver's paper is smaller than the size of the original you are sending, the document is automatically reduced to fit onto the paper available at the other end.

Illustration of transmission with Auto Reduce

Important

  • If you turn this function off, the scale of the original is maintained and some parts of the image may be deleted when printed at the other end.

    Illustration of Auto Reduce

1Place the original, and then select the scan settings you require.

2Press [TX Mode].

Operation panel screen illustration

3Select [Option Setting].

4Make sure that [Auto Reduce] is highlighted.

Operation panel screen illustration

To cancel Auto Reduce, press [Auto Reduce] to turn the highlight off.

5Press [OK] twice.

6Specify the destination, and then press the [Start] key.