Skip header
 

Registering a Fax Destination

This section explains how to register a name and fax number to the Address Book.

1Press the [User Tools/Counter] key.

User Tools/Counter key illustration

2Press [System Settings].

Operation panel screen illustration

3Press [Administrator Tools].

4Press [Address Book Management].

5Check that [Program / Change] is selected.

6Press [New Program].

Operation panel screen illustration

7Press [Change] under “Name”.

Operation panel screen illustration

The name entry display appears.

8Enter the name, and then press [OK].

If necessary, press [Change] under “Key Display”, and then enter the name of the key to which the destination is assigned.

9Press the key for the classification you want to use under “Select Title”.

10Press [Fax Dest.].

Operation panel screen illustration

11Press [Change] under “Fax Destination”.

Operation panel screen illustration

12Enter the fax number using the number keys, and then press [OK].

13Specify the following functions for each destination, as necessary:

  • Adv. Features: program SUB/SID/SEP/PWD Codes.

  • Fax Header: specify the header that appears on your faxes when the receiver prints them.

  • Label Insertion: specify label information such as the destination name that appears on your faxes when the receiver prints them.

14Press [OK].

15Press [Exit].

16Press the [User Tools/Counter] key.

Note

  • For details about the procedure in step 13, see “Registering Addresses and Users for Facsimile/Scanner Functions”, Network and System Settings Guide.